# NETRON **URL:** https://forum.obsidiancontrol.com/c/netron/47.md?page=3 [Latest](https://forum.obsidiancontrol.com/latest.md) · [Categories](https://forum.obsidiancontrol.com/categories.md) · [Tags](https://forum.obsidiancontrol.com/tags.md) **Page:** 4 --- ## [Some RDM10 are sending strange ArtPollReply](https://forum.obsidiancontrol.com/t/some-rdm10-are-sending-strange-artpollreply/7972)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 0\ **Last updated:** [June 3, 2024, 3:10pm UTC](https://forum.obsidiancontrol.com/t/some-rdm10-are-sending-strange-artpollreply/7972 "2024-06-03T15:10:10Z")
Hi, i discoverd one RDM10 in our Setup sometimes sends a strange ArtPollReply. I add a Wireshark-Dump FW: 2.9.4 RDM 10 strange ArtPollReply.pcapng (3.2 KB) --- ## [RDM10 ArtPollReply is Send to Broadcast IP, this is not like spec Art-Net 4 Protocol Release V1.4](https://forum.obsidiancontrol.com/t/rdm10-artpollreply-is-send-to-broadcast-ip-this-is-not-like-spec-art-net-4-protocol-release-v1-4/7576)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 3\ **Last updated:** [June 3, 2024, 11:40am UTC](https://forum.obsidiancontrol.com/t/rdm10-artpollreply-is-send-to-broadcast-ip-this-is-not-like-spec-art-net-4-protocol-release-v1-4/7576 "2024-06-03T11:40:43Z")
ArtPollReply has to ne send as Unicast to the IP where the ArtPoll came from --- ## [EP4/EN4 TCP/UDP Control](https://forum.obsidiancontrol.com/t/ep4-en4-tcp-udp-control/7616)
**Author:** [@GriffinLD](https://forum.obsidiancontrol.com/u/GriffinLD)\ **Replies:** 1\ **Last updated:** [May 3, 2024, 1:49am UTC](https://forum.obsidiancontrol.com/t/ep4-en4-tcp-udp-control/7616 "2024-05-03T01:49:02Z")
Has anyone come across a way to fire cues by way of simple TCP or UDP strings? Have a few use cases where it would be great to activate cueing from Crestron/AMX systems using ethernet commands. Thanks, -Griffin --- ## [NS8](https://forum.obsidiancontrol.com/t/ns8/7562)
**Author:** [@Jirwind](https://forum.obsidiancontrol.com/u/Jirwind)\ **Replies:** 4\ **Last updated:** [April 25, 2024, 1:07pm UTC](https://forum.obsidiancontrol.com/t/ns8/7562 "2024-04-25T13:07:08Z")
New Network Switch support AVB Protocol ? --- ## [NETRON Gateway/Command Line](https://forum.obsidiancontrol.com/t/netron-gateway-command-line/7874)
**Author:** [@clement\_miolan](https://forum.obsidiancontrol.com/u/clement_miolan)\ **Replies:** 4\ **Last updated:** [April 22, 2024, 7:21pm UTC](https://forum.obsidiancontrol.com/t/netron-gateway-command-line/7874 "2024-04-22T19:21:39Z")
Hello, I would like to be able to make interVLAN routing with EN12 and EN4 but I don’t find where to set the gateway in the IP settings. And i would like to know if command line exist for those products, like SSH or ot… --- ## [EN4 erratic after update to 2.9.4](https://forum.obsidiancontrol.com/t/en4-erratic-after-update-to-2-9-4/7811)
**Author:** [@MrBasset](https://forum.obsidiancontrol.com/u/MrBasset)\ **Replies:** 6\ **Last updated:** [March 31, 2024, 12:12am UTC](https://forum.obsidiancontrol.com/t/en4-erratic-after-update-to-2-9-4/7811 "2024-03-31T00:12:49Z")
Hi, We recently updated our EN4 to firmware + web versions 2.9.4. However we had issues during the upgrade and since then the EN4 has been behaving erratically - the first upgrade failed and the unit had to be restored … --- ## [Merging](https://forum.obsidiancontrol.com/t/merging/7805)
**Author:** [@HomeLite](https://forum.obsidiancontrol.com/u/HomeLite)\ **Replies:** 8\ **Last updated:** [February 29, 2024, 10:34pm UTC](https://forum.obsidiancontrol.com/t/merging/7805 "2024-02-29T22:34:05Z")
Hi there! We have a lighting console and architectural system. If I point both of them to the same sACN universe, will the Netron node do HTP between the two? Or do I need to point them at two different universes and mer… --- ## [EN4 connected to Grand MA3 not responding](https://forum.obsidiancontrol.com/t/en4-connected-to-grand-ma3-not-responding/7787)
**Author:** [@craigsaldanha01](https://forum.obsidiancontrol.com/u/craigsaldanha01)\ **Replies:** 3\ **Last updated:** [February 21, 2024, 4:32pm UTC](https://forum.obsidiancontrol.com/t/en4-connected-to-grand-ma3-not-responding/7787 "2024-02-21T16:32:05Z")
Hi, I scrolled through the page and couldn’t find anyone who reported the same issue so I started a new topic. I have a grand ma3 compact and grand ma3 light which we normally use via artnet connected to 4 units of the … --- ## [Netron controleur 10 boutons](https://forum.obsidiancontrol.com/t/netron-controleur-10-boutons/7785)
**Author:** [@Kenny](https://forum.obsidiancontrol.com/u/Kenny)\ **Replies:** 2\ **Last updated:** [February 20, 2024, 7:56am UTC](https://forum.obsidiancontrol.com/t/netron-controleur-10-boutons/7785 "2024-02-20T07:56:14Z")
Bonjour à tous, Lors de l’ISE 2024 nous avons constaté un contrôleur murale avec 10 petits boutons. Certainement des raccourci pour des CUE. Malheureusement je ne trouve nulle par cet appareil ! (voir photo) Quelqu… --- ## [Cues not working & Screen unreponsive](https://forum.obsidiancontrol.com/t/cues-not-working-screen-unreponsive/7729)
**Author:** [@th5630](https://forum.obsidiancontrol.com/u/th5630)\ **Replies:** 1\ **Last updated:** [February 6, 2024, 4:13am UTC](https://forum.obsidiancontrol.com/t/cues-not-working-screen-unreponsive/7729 "2024-02-06T04:13:40Z")
I have a brand new Netron EN4 on V2.9.2 and am having all sorts of random issues. To be clear, it does appear to be working correctly with 2 universes of DMX output (with ArtNet signal coming from Vista3R4). The proble… --- ## [NETRON 2.9.4 - CLU 1.0.009](https://forum.obsidiancontrol.com/t/netron-2-9-4-clu-1-0-009/7755)
**Author:** [@Matthias](https://forum.obsidiancontrol.com/u/Matthias)\ **Replies:** 3\ **Last updated:** [February 1, 2024, 4:50pm UTC](https://forum.obsidiancontrol.com/t/netron-2-9-4-clu-1-0-009/7755 "2024-02-01T16:50:17Z")
CLU (obsidiancontrol.com) Release 1.0.009 (01/22/2024) Includes NETRON Firmware 2.9.4 (EN12, EN4, EP4, EP2, RDM10) Note: Updates require two files, 1. “nfw” per device and 2. “img” web package NETRON devices are no… --- ## [Connect EP4 Node with GrandMA2](https://forum.obsidiancontrol.com/t/connect-ep4-node-with-grandma2/7746)
**Author:** [@ernibenri](https://forum.obsidiancontrol.com/u/ernibenri)\ **Replies:** 2\ **Last updated:** [January 16, 2024, 3:53pm UTC](https://forum.obsidiancontrol.com/t/connect-ep4-node-with-grandma2/7746 "2024-01-16T15:53:42Z")
Hi Folks, I dont even know if I have a Issue now or not but… I have a video shoot on sunday where I have to provide a timecode show and the location has a MA2 Command Wing for lights, as the video crew brings 8 Titantu… --- ## [While using the RDM10 as Artnet-Node, the outputed Refreshrate of DMX is not as high as configured](https://forum.obsidiancontrol.com/t/while-using-the-rdm10-as-artnet-node-the-outputed-refreshrate-of-dmx-is-not-as-high-as-configured/7510)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 2\ **Last updated:** [December 29, 2023, 5:20am UTC](https://forum.obsidiancontrol.com/t/while-using-the-rdm10-as-artnet-node-the-outputed-refreshrate-of-dmx-is-not-as-high-as-configured/7510 "2023-12-29T05:20:29Z")
Hi, i setup a RDM10 as ArtNet-Node and set the Refreshrate to 40Hz, i only measure a frequence of round about 10Hz with my Swisson XMT-350 DMX/RDM-Tester --- ## [RDM10 FactroyReset not reset DeviceLabel Parameter](https://forum.obsidiancontrol.com/t/rdm10-factroyreset-not-reset-devicelabel-parameter/7683)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 1\ **Last updated:** [December 29, 2023, 5:19am UTC](https://forum.obsidiancontrol.com/t/rdm10-factroyreset-not-reset-devicelabel-parameter/7683 "2023-12-29T05:19:43Z")
If i perform a FactroyReset not reset the RDM10 the DeviceLabel Parameter in RDM is not reset testet with 2.9.3 Beta --- ## [RDM10 ArtPollReply Long-Name wrong formated](https://forum.obsidiancontrol.com/t/rdm10-artpollreply-long-name-wrong-formated/7575)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 2\ **Last updated:** [December 29, 2023, 5:19am UTC](https://forum.obsidiancontrol.com/t/rdm10-artpollreply-long-name-wrong-formated/7575 "2023-12-29T05:19:16Z")
The Name “4” is terminatet with a 0x00 but after Termination there are other Chars in the 64 Byte long Defined Space --- ## [RDM 10 cause flickering of Robe Spicke and SGM P1 due to timing issue](https://forum.obsidiancontrol.com/t/rdm-10-cause-flickering-of-robe-spicke-and-sgm-p1-due-to-timing-issue/7686)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 1\ **Last updated:** [November 28, 2023, 9:42pm UTC](https://forum.obsidiancontrol.com/t/rdm-10-cause-flickering-of-robe-spicke-and-sgm-p1-due-to-timing-issue/7686 "2023-11-28T21:42:40Z")
Hi, on my setup here, there are a lot of Devices behind the RDM10 there is a flickering som times, caused due to the RDM10 because its timewindow for the Devices to respond to RDM-Requests is to short, the RDM10 is sen… --- ## [Control RDM using external APP with RDM-NET while using sACN](https://forum.obsidiancontrol.com/t/control-rdm-using-external-app-with-rdm-net-while-using-sacn/7632)
**Author:** [@simaog](https://forum.obsidiancontrol.com/u/simaog)\ **Replies:** 2\ **Last updated:** [November 24, 2023, 4:02pm UTC](https://forum.obsidiancontrol.com/t/control-rdm-using-external-app-with-rdm-net-while-using-sacn/7632 "2023-11-24T16:02:36Z")
HI, I Have several Netron producs, namely EP4’s and EN12’s. One company I work for uses Luminex and they are capable of use RDM while using sACN instead of the Art-Net. I have several reasons not to use Art-Net on our … --- ## [NETRON CLU 1.007 / Beta Firmware 2.93](https://forum.obsidiancontrol.com/t/netron-clu-1-007-beta-firmware-2-93/7602)
**Author:** [@Matthias](https://forum.obsidiancontrol.com/u/Matthias)\ **Replies:** 11\ **Last updated:** [November 15, 2023, 5:31am UTC](https://forum.obsidiancontrol.com/t/netron-clu-1-007-beta-firmware-2-93/7602 "2023-11-15T05:31:56Z")
An improved version of CLU and matching NETRON Beta 2.93 are avaiable for testing. This includes support for RDM capture on DMX Input ports, for example to transfer RDM for Robe Follow Spot Systems. Many improvements w… --- ## [Changing the IP of RDM10 wia Webinterface, the Device is not directly accesible via Webinterface](https://forum.obsidiancontrol.com/t/changing-the-ip-of-rdm10-wia-webinterface-the-device-is-not-directly-accesible-via-webinterface/7514)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 4\ **Last updated:** [October 11, 2023, 5:23am UTC](https://forum.obsidiancontrol.com/t/changing-the-ip-of-rdm10-wia-webinterface-the-device-is-not-directly-accesible-via-webinterface/7514 "2023-10-11T05:23:33Z")
I changed the IP from 2.x.x.x to 2.0.0.11 and the Device was not accessible via Webinterface immidiatly when using the new IP address. Power off and on helped. --- ## [poe injector for en12?](https://forum.obsidiancontrol.com/t/poe-injector-for-en12/7621)
**Author:** [@deflost](https://forum.obsidiancontrol.com/u/deflost)\ **Replies:** 1\ **Last updated:** [October 9, 2023, 6:19am UTC](https://forum.obsidiancontrol.com/t/poe-injector-for-en12/7621 "2023-10-09T06:19:44Z")
hello, is there a known and def. working poe inline powerinjector we shoud use with en12? thx. --- ## [EN12-45 POE Failure](https://forum.obsidiancontrol.com/t/en12-45-poe-failure/7617)
**Author:** [@cbt](https://forum.obsidiancontrol.com/u/cbt)\ **Replies:** 0\ **Last updated:** [October 4, 2023, 10:55am UTC](https://forum.obsidiancontrol.com/t/en12-45-poe-failure/7617 "2023-10-04T10:55:37Z")
Just wanted to see if anyone else out there has suffered from POE failure on Netron units (more specifically EN12-45s). We have three, two of which have had POE fail at different points. The EP2’s that we have which ar… --- ## [RDM10 Port 9 & 10 went down](https://forum.obsidiancontrol.com/t/rdm10-port-9-10-went-down/7503)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 5\ **Last updated:** [August 28, 2023, 3:23pm UTC](https://forum.obsidiancontrol.com/t/rdm10-port-9-10-went-down/7503 "2023-08-28T15:23:01Z")
Hi, while using the RDM10, it occures that Port 9 and 10 stoped sending DMX, and RDM while the Other Ports keep working, the LED Indicator was lit up like the other Ports FW: 2.9.2 --- ## [Netron EN12 Showing Web Firmware 0.0](https://forum.obsidiancontrol.com/t/netron-en12-showing-web-firmware-0-0/7554)
**Author:** [@Atrain0000](https://forum.obsidiancontrol.com/u/Atrain0000)\ **Replies:** 7\ **Last updated:** [August 16, 2023, 4:01pm UTC](https://forum.obsidiancontrol.com/t/netron-en12-showing-web-firmware-0-0/7554 "2023-08-16T16:01:56Z")
I have an Netron EN12 which I was attempting to update the firmware of. For some reason it errored during the update process. It will still output DMX and function in that way. But, I can no longer access it via it’s IP … --- ## [EN12 Cue problems](https://forum.obsidiancontrol.com/t/en12-cue-problems/7268)
**Author:** [@Filadelfiavennesla](https://forum.obsidiancontrol.com/u/Filadelfiavennesla)\ **Replies:** 10\ **Last updated:** [August 16, 2023, 3:48pm UTC](https://forum.obsidiancontrol.com/t/en12-cue-problems/7268 "2023-08-16T15:48:11Z")
Hi! We own an EN12 (New, 2 weeks old) and a M6 (2013, no upgraded HW, running v4.2) console. Console ONLY running an Art-Net system. EN12 running v2.9.2. Same for Web. Using Custom IP (192.168.1.x). Art-Net offset is 0… --- ## [LLRP(Low Level Recovery Protocol) issue : Wrong Component \_Type](https://forum.obsidiancontrol.com/t/llrp-low-level-recovery-protocol-issue-wrong-component-type/7549)
**Author:** [@TDatRJ](https://forum.obsidiancontrol.com/u/TDatRJ)\ **Replies:** 2\ **Last updated:** [August 5, 2023, 9:51am UTC](https://forum.obsidiancontrol.com/t/llrp-low-level-recovery-protocol-issue-wrong-component-type/7549 "2023-08-05T09:51:18Z")
Hello, While testing LLRP (part of RDMNet) with an EN12 we noticed that you return for Component-Type 0x03 . It is incorrect and it is processed as Unknown (Wireshark - RDMNet dissector). You should return either 0x0… --- ## [NETRON Central Utility - Beta 4](https://forum.obsidiancontrol.com/t/netron-central-utility-beta-4/7125)
**Author:** [@Matthias](https://forum.obsidiancontrol.com/u/Matthias)\ **Replies:** 13\ **Last updated:** [July 16, 2023, 4:29pm UTC](https://forum.obsidiancontrol.com/t/netron-central-utility-beta-4/7125 "2023-07-16T16:29:12Z")
Some additional bug fixes and layout and speed improvements for the Netron Central Utility. The installer contains updated firmware as well, simply try the firmware update button and see if it pushes to all devices with… --- ## [Can a single universe be controlled by two consoles using the merger function on EN-12 or EN-4?](https://forum.obsidiancontrol.com/t/can-a-single-universe-be-controlled-by-two-consoles-using-the-merger-function-on-en-12-or-en-4/7515)
**Author:** [@Gahrgoyle](https://forum.obsidiancontrol.com/u/Gahrgoyle)\ **Replies:** 0\ **Last updated:** [July 6, 2023, 10:11pm UTC](https://forum.obsidiancontrol.com/t/can-a-single-universe-be-controlled-by-two-consoles-using-the-merger-function-on-en-12-or-en-4/7515 "2023-07-06T22:11:54Z")
I’m new to this whole sACN and merging business, so bare with me. I am trying to control dimmers & relays that are on the same universe from two separate consoles and I’m having no luck. My power relays and lighting dim… --- ## [RDM is not working at all while using the Merger-Function on RDM10, only the RDM10 itself show up](https://forum.obsidiancontrol.com/t/rdm-is-not-working-at-all-while-using-the-merger-function-on-rdm10-only-the-rdm10-itself-show-up/7511)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 7\ **Last updated:** [July 6, 2023, 6:52pm UTC](https://forum.obsidiancontrol.com/t/rdm-is-not-working-at-all-while-using-the-merger-function-on-rdm10-only-the-rdm10-itself-show-up/7511 "2023-07-06T18:52:52Z")
Hi, if i set up the RDM10 in Merge-Mode and use my Swisson XMT-350 DMX/RDM-Tester, on Port A or B, only the RDM10 show up --- ## [RDM10 as Artnet-Node has a significant Delay](https://forum.obsidiancontrol.com/t/rdm10-as-artnet-node-has-a-significant-delay/7504)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 4\ **Last updated:** [July 6, 2023, 5:13pm UTC](https://forum.obsidiancontrol.com/t/rdm10-as-artnet-node-has-a-significant-delay/7504 "2023-07-06T17:13:39Z")
If is Use The RDM10 as ArtNet-Node and for comparison i use a ELC Node Outputing the Same Universes. there is a Noticable Delay between Both Nodes (the Fixtures are reacting delayed around 100-200 ms) --- ## [Not able to use RDM over Artnet on RDM10 with grandMA2](https://forum.obsidiancontrol.com/t/not-able-to-use-rdm-over-artnet-on-rdm10-with-grandma2/7509)
**Author:** [@Q-Light](https://forum.obsidiancontrol.com/u/Q-Light)\ **Replies:** 6\ **Last updated:** [July 6, 2023, 4:03pm UTC](https://forum.obsidiancontrol.com/t/not-able-to-use-rdm-over-artnet-on-rdm10-with-grandma2/7509 "2023-07-06T16:03:48Z")
When i try to Use RDM on my 12x RDM10 Setup with grandMA2, only some UIDs where found, but the Console isnt able to gether all other necessary Paramter [Previous page](https://forum.obsidiancontrol.com/c/netron/47.md?page=2) [Next page](https://forum.obsidiancontrol.com/c/netron/47.md?page=4)