# Hardware **URL:** https://forum.obsidiancontrol.com/c/onyx/hardware/33.md?page=3 [Latest](https://forum.obsidiancontrol.com/latest.md) · [Categories](https://forum.obsidiancontrol.com/categories.md) · [Tags](https://forum.obsidiancontrol.com/tags.md) **Page:** 4 --- ## [Ethernet Interface loses connection every 7 seconds](https://forum.obsidiancontrol.com/t/ethernet-interface-loses-connection-every-7-seconds/6372)
**Author:** [@Tabekupi](https://forum.obsidiancontrol.com/u/Tabekupi)\ **Replies:** 4\ **Last updated:** [September 1, 2020, 2:19pm UTC](https://forum.obsidiancontrol.com/t/ethernet-interface-loses-connection-every-7-seconds/6372 "2020-09-01T14:19:03Z")
Hey, sorry if my english isn’t the best but if got an pretty specific problem and I don’t find it anywhere especially not in my nativ language. I’m trying to use an Eurolite Node 1 interface which supports Art Net and … --- ## [Problems with enttec on version 4.2.1057](https://forum.obsidiancontrol.com/t/problems-with-enttec-on-version-4-2-1057/6369)
**Author:** [@AnnoyedSandwich](https://forum.obsidiancontrol.com/u/AnnoyedSandwich)\ **Replies:** 1\ **Last updated:** [August 25, 2020, 3:35pm UTC](https://forum.obsidiancontrol.com/t/problems-with-enttec-on-version-4-2-1057/6369 "2020-08-25T15:35:02Z")
Hi, so I’m using an older version of onyx to get the enttec support since my venue is to broke to afford the nx hardware. I’m using an enttec opendmx ethernet dongle. For some reason onyx doesn’t want to output via thi… --- ## [Onyx can't see my NX DMX 2](https://forum.obsidiancontrol.com/t/onyx-cant-see-my-nx-dmx-2/6363)
**Author:** [@Stefan\_Trudeau](https://forum.obsidiancontrol.com/u/Stefan_Trudeau)\ **Replies:** 3\ **Last updated:** [August 18, 2020, 8:02pm UTC](https://forum.obsidiancontrol.com/t/onyx-cant-see-my-nx-dmx-2/6363 "2020-08-18T20:02:30Z")
I’m running Onyx 4.4.1193.0 on my PC. The issue is my NX DMX isn’t connecting with the Onyx PC software. I’m currently not plugged into any network. What step am I missing? ! 15977745817252643427702506046535|281x500 … --- ## [ONYX, MIDI, and ShowCockpit](https://forum.obsidiancontrol.com/t/onyx-midi-and-showcockpit/6335)
**Author:** [@David\_Henry](https://forum.obsidiancontrol.com/u/David_Henry)\ **Replies:** 0\ **Last updated:** [July 28, 2020, 1:38pm UTC](https://forum.obsidiancontrol.com/t/onyx-midi-and-showcockpit/6335 "2020-07-28T13:38:00Z")
Hey Friends, I’ve created a video that dispells a lot of the myths surrounding what ShowCockpit can and can’t do with ONYX - and my typical setup: Enjoy!, -David --- ## [M6 upgrade](https://forum.obsidiancontrol.com/t/m6-upgrade/6048)
**Author:** [@matt](https://forum.obsidiancontrol.com/u/matt)\ **Replies:** 22\ **Last updated:** [July 15, 2020, 11:29pm UTC](https://forum.obsidiancontrol.com/t/m6-upgrade/6048 "2020-07-15T23:29:33Z")
Any word on the M6 upgrade? cost and or availability --- ## [Will Onyx work with Artnet now and in the future?](https://forum.obsidiancontrol.com/t/will-onyx-work-with-artnet-now-and-in-the-future/6219)
**Author:** [@Scenljus](https://forum.obsidiancontrol.com/u/Scenljus)\ **Replies:** 2\ **Last updated:** [May 5, 2020, 4:32pm UTC](https://forum.obsidiancontrol.com/t/will-onyx-work-with-artnet-now-and-in-the-future/6219 "2020-05-05T16:32:50Z")
I used an Enttec Open DMX USB Interface for dmx control with onyx and it don’t works any more. I wonder if I can control the lights with Artnet now and if it will work in future Onyx versions without any extra hardware s… --- ## [support CRMX from LumenRadio](https://forum.obsidiancontrol.com/t/support-crmx-from-lumenradio/6098)
**Author:** [@eduardnator](https://forum.obsidiancontrol.com/u/eduardnator)\ **Replies:** 4\ **Last updated:** [March 9, 2020, 2:46pm UTC](https://forum.obsidiancontrol.com/t/support-crmx-from-lumenradio/6098 "2020-03-09T14:46:17Z")
Hi Long time ago M-Series supported CRMX hardware from Lumen Radio https://lumenradio.com/martin-professional-chamsys-add-support-crmx-nova-usb-dongle/ Is It still working? --- ## [Playback II Module](https://forum.obsidiancontrol.com/t/playback-ii-module/6047)
**Author:** [@Pochflyboy](https://forum.obsidiancontrol.com/u/Pochflyboy)\ **Replies:** 3\ **Last updated:** [February 11, 2020, 8:44am UTC](https://forum.obsidiancontrol.com/t/playback-ii-module/6047 "2020-02-11T08:44:35Z")
I have a playback II module that used to work with onyx but I cant get to work now. It shows up in the firmware update but doesnt sync to what’s happening in the software. Should there be anything under IIC Devices? --- ## [M2GO CMOS Battery Replacement](https://forum.obsidiancontrol.com/t/m2go-cmos-battery-replacement/5968)
**Author:** [@Simon](https://forum.obsidiancontrol.com/u/Simon)\ **Replies:** 4\ **Last updated:** [January 23, 2020, 10:15pm UTC](https://forum.obsidiancontrol.com/t/m2go-cmos-battery-replacement/5968 "2020-01-23T22:15:15Z")
Looks like I need to replace the CMOS battery on my M2GO, not keeping the date on reboot and occasionally hanging on powerup. Does anyone have any experience of replacing the CMOS battery on an M2GO? Hoping it’s an eas… --- ## [Enttec Playback with with Onyx](https://forum.obsidiancontrol.com/t/enttec-playback-with-with-onyx/5894)
**Author:** [@arretx](https://forum.obsidiancontrol.com/u/arretx)\ **Replies:** 2\ **Last updated:** [October 21, 2019, 8:02pm UTC](https://forum.obsidiancontrol.com/t/enttec-playback-with-with-onyx/5894 "2019-10-21T20:02:54Z")
We have an Enttec Playback wing connected to our network. Is it possible to configure it to work with Onyx? I can’t get Onyx to see it. --- ## [M1 White Screen plus beeping sound](https://forum.obsidiancontrol.com/t/m1-white-screen-plus-beeping-sound/5846)
**Author:** [@JeffreyOng](https://forum.obsidiancontrol.com/u/JeffreyOng)\ **Replies:** 0\ **Last updated:** [September 9, 2019, 1:12am UTC](https://forum.obsidiancontrol.com/t/m1-white-screen-plus-beeping-sound/5846 "2019-09-09T01:12:59Z")
M1 wont boot after replacement of new main board. It still display white screen with beeping. Both processor and rams were transferred over. Tried reset BIOs and also didn’t help. --- ## [Wrong Firmware Update PCB](https://forum.obsidiancontrol.com/t/wrong-firmware-update-pcb/5106)
**Author:** [@Leuchte](https://forum.obsidiancontrol.com/u/Leuchte)\ **Replies:** 1\ **Last updated:** [September 2, 2019, 5:04am UTC](https://forum.obsidiancontrol.com/t/wrong-firmware-update-pcb/5106 "2019-09-02T05:04:01Z")
I’ve installed the wrong USB Firmware to the M2PC. If I start the firmware update now, there is no entry anymore. Is there a tool to reset the M2PC? --- ## [Martin M1 System Upgrade](https://forum.obsidiancontrol.com/t/martin-m1-system-upgrade/5827)
**Author:** [@Bobko](https://forum.obsidiancontrol.com/u/Bobko)\ **Replies:** 1\ **Last updated:** [August 20, 2019, 11:32pm UTC](https://forum.obsidiancontrol.com/t/martin-m1-system-upgrade/5827 "2019-08-20T23:32:28Z")
Since the recent news came out that the M1 and M2GO would no longer be supported due to “aging hardware, outdated processors and lack of graphics support for DYLOS.”, I’ve been wondering if the M1 actually could handle n… --- ## [Netron = universe unlock?](https://forum.obsidiancontrol.com/t/netron-universe-unlock/5821)
**Author:** [@Mike](https://forum.obsidiancontrol.com/u/Mike)\ **Replies:** 3\ **Last updated:** [August 16, 2019, 7:23am UTC](https://forum.obsidiancontrol.com/t/netron-universe-unlock/5821 "2019-08-16T07:23:09Z")
Hello, Question about upcoming Netron products: Are they unlocking the same amount of the universes as they have outputs if connected to the X-Net or via ArtNet? --- ## [NX Wing Manual](https://forum.obsidiancontrol.com/t/nx-wing-manual/5813)
**Author:** [@waypointtwo](https://forum.obsidiancontrol.com/u/waypointtwo)\ **Replies:** 1\ **Last updated:** [August 3, 2019, 4:21am UTC](https://forum.obsidiancontrol.com/t/nx-wing-manual/5813 "2019-08-03T04:21:05Z")
Is there an online manual for the Nx WIng? --- ## [Service center for M2PC and NX Wing](https://forum.obsidiancontrol.com/t/service-center-for-m2pc-and-nx-wing/5806)
**Author:** [@Brad1776](https://forum.obsidiancontrol.com/u/Brad1776)\ **Replies:** 3\ **Last updated:** [July 29, 2019, 3:07pm UTC](https://forum.obsidiancontrol.com/t/service-center-for-m2pc-and-nx-wing/5806 "2019-07-29T15:07:20Z")
I’ve got both the NX Wing and an M2PC, and am searching for service centers where I can have them looked at, currently I only have issues with the M2PC. I need to find replacement parts for the faders and encoder wheel… --- ## [Martin M1 long start after update Onyx](https://forum.obsidiancontrol.com/t/martin-m1-long-start-after-update-onyx/5770)
**Author:** [@Ben](https://forum.obsidiancontrol.com/u/Ben)\ **Replies:** 2\ **Last updated:** [July 29, 2019, 1:01pm UTC](https://forum.obsidiancontrol.com/t/martin-m1-long-start-after-update-onyx/5770 "2019-07-29T13:01:11Z")
Hello, Yesterday we installed the latest Onyx Version 4.2.1045 on M1. Hen booting, the console takes at least 5 min run Onyx… (black screen before loading the program) someone has the problem? thank you --- ## [ONYX NX Touch](https://forum.obsidiancontrol.com/t/onyx-nx-touch/5777)
**Author:** [@masterl1983](https://forum.obsidiancontrol.com/u/masterl1983)\ **Replies:** 4\ **Last updated:** [July 24, 2019, 3:15pm UTC](https://forum.obsidiancontrol.com/t/onyx-nx-touch/5777 "2019-07-24T15:15:53Z")
Hi, I have seen that within the latest release of onyx you have added support for the NX Touch. Is there any futher information about this controller or did you just changed the name from M-Touch to NX Touch? --- ## [Maxxyz Console - access to belts & \< \> buttons adjacent to touch screens](https://forum.obsidiancontrol.com/t/maxxyz-console-access-to-belts-buttons-adjacent-to-touch-screens/5779)
**Author:** [@Ben\_Robertson](https://forum.obsidiancontrol.com/u/Ben_Robertson)\ **Replies:** 0\ **Last updated:** [July 9, 2019, 12:33am UTC](https://forum.obsidiancontrol.com/t/maxxyz-console-access-to-belts-buttons-adjacent-to-touch-screens/5779 "2019-07-09T00:33:12Z")
I hope this finds you well. I have been upgrading an old Maxxyz console, as i can’t afford a new console, but really appreciate the control surface present in this old console. I have replaced the 2 x intel Piii mother… --- ## [M2PC only DMX card found, Main panel and touch not found at all](https://forum.obsidiancontrol.com/t/m2pc-only-dmx-card-found-main-panel-and-touch-not-found-at-all/5754)
**Author:** [@Jostein](https://forum.obsidiancontrol.com/u/Jostein)\ **Replies:** 3\ **Last updated:** [July 4, 2019, 4:10pm UTC](https://forum.obsidiancontrol.com/t/m2pc-only-dmx-card-found-main-panel-and-touch-not-found-at-all/5754 "2019-07-04T16:10:30Z")
During a festival this weekend the M2PC stopped working after one reboot of the computer. Only card found is the DMX card. REbooting the system and disconnecting cables I have been able of getting the Touch screenn (on t… --- ## [ONYX not sending output to Enttec ODE MK2 - ArtNet](https://forum.obsidiancontrol.com/t/onyx-not-sending-output-to-enttec-ode-mk2-artnet/5499)
**Author:** [@jxkoepk](https://forum.obsidiancontrol.com/u/jxkoepk)\ **Replies:** 6\ **Last updated:** [July 3, 2019, 9:31am UTC](https://forum.obsidiancontrol.com/t/onyx-not-sending-output-to-enttec-ode-mk2-artnet/5499 "2019-07-03T09:31:48Z")
Hello everyone, I have a Enttec ODE MK2 artnet box, connected to the same network, same switch as my Windows 10 Laptop. I can use the web browser to connect to the Enttec device, I see that it is configured for ArtNet,… --- ## [Moving heads pan and tilt](https://forum.obsidiancontrol.com/t/moving-heads-pan-and-tilt/5724)
**Author:** [@Zion2](https://forum.obsidiancontrol.com/u/Zion2)\ **Replies:** 1\ **Last updated:** [June 19, 2019, 10:55am UTC](https://forum.obsidiancontrol.com/t/moving-heads-pan-and-tilt/5724 "2019-06-19T10:55:30Z")
Hi, I was facing a problem with my moving heads position, I was in a show for the past 4months continously during evenings, so morning hours the crew used to cover all the moving heads since it’s an open air theater and … --- ## [ONYX/MPC not sending output to Enttec DMX USB Pro MK 2](https://forum.obsidiancontrol.com/t/onyx-mpc-not-sending-output-to-enttec-dmx-usb-pro-mk-2/5016)
**Author:** [@Raj\_Jayswal](https://forum.obsidiancontrol.com/u/Raj_Jayswal)\ **Replies:** 14\ **Last updated:** [November 20, 2018, 4:43pm UTC](https://forum.obsidiancontrol.com/t/onyx-mpc-not-sending-output-to-enttec-dmx-usb-pro-mk-2/5016 "2018-11-20T16:43:03Z")
Hey guys, new here so am unsure if I have posted to the correct place or with the correct info. Apologies for any obvious mistakes. So I recently bought a Enttec DMX USB Pro MK 2 and used it with a generic light for tes… --- ## [M2PC Output Freezing](https://forum.obsidiancontrol.com/t/m2pc-output-freezing/5745)
**Author:** [@hilightsnz](https://forum.obsidiancontrol.com/u/hilightsnz)\ **Replies:** 2\ **Last updated:** [June 13, 2019, 11:21am UTC](https://forum.obsidiancontrol.com/t/m2pc-output-freezing/5745 "2019-06-13T11:21:34Z")
Hi Team, Recently during a live Tv show the output from my M2PC froze. I tested my M-Series Submaster output and it was fine. This is not the first time it has happened recently. At the time I was running software 045.… --- ## [connect Elation Midicon 2](https://forum.obsidiancontrol.com/t/connect-elation-midicon-2/5704)
**Author:** [@DonCamillo](https://forum.obsidiancontrol.com/u/DonCamillo)\ **Replies:** 1\ **Last updated:** [May 29, 2019, 2:00pm UTC](https://forum.obsidiancontrol.com/t/connect-elation-midicon-2/5704 "2019-05-29T14:00:13Z")
hi guys, does someone know how it’s possable to connect & map the “ELATION MIDICON 2” in a directly way with “Onyx onPC” ? the only way how i get it, is with another software called “ShowCockpit” from “Ricardo Dias”. b… --- ## [NX4 Ship Date](https://forum.obsidiancontrol.com/t/nx4-ship-date/5703)
**Author:** [@rjlynch](https://forum.obsidiancontrol.com/u/rjlynch)\ **Replies:** 3\ **Last updated:** [May 29, 2019, 1:45pm UTC](https://forum.obsidiancontrol.com/t/nx4-ship-date/5703 "2019-05-29T13:45:25Z")
Hello friends! Sad news to report: my beloved M1 went up in smoke the other evening. The PSU failed catastrophically, taking the motherboard (and possibly other components) with it. It was among the first-builds and has… --- ## [Onyx Software & M-Series Programming Wing](https://forum.obsidiancontrol.com/t/onyx-software-m-series-programming-wing/4928)
**Author:** [@hilightsnz](https://forum.obsidiancontrol.com/u/hilightsnz)\ **Replies:** 6\ **Last updated:** [May 23, 2019, 9:18pm UTC](https://forum.obsidiancontrol.com/t/onyx-software-m-series-programming-wing/4928 "2019-05-23T21:18:03Z")
Hi Team, Just wondering if the new Onyx software will work with the old M-Series programming and the original playback wing? I see that the submaster, playback series II, and button wings are both supported but nothing… --- ## [Akai Midi Control](https://forum.obsidiancontrol.com/t/akai-midi-control/5695)
**Author:** [@MacNeil\_Media](https://forum.obsidiancontrol.com/u/MacNeil_Media)\ **Replies:** 1\ **Last updated:** [May 22, 2019, 2:15pm UTC](https://forum.obsidiancontrol.com/t/akai-midi-control/5695 "2019-05-22T14:15:06Z")
Hi! I just recently bought an APCmini from Akai Pro, and I was hoping that it would be compatible with M-PC. As far as I can tell you have to buy a program called RD/ShowCockPit. Is there another program out that that a… --- ## [M1HD Crash](https://forum.obsidiancontrol.com/t/m1hd-crash/5689)
**Author:** [@drewdeabenderfer](https://forum.obsidiancontrol.com/u/drewdeabenderfer)\ **Replies:** 0\ **Last updated:** [May 18, 2019, 4:03am UTC](https://forum.obsidiancontrol.com/t/m1hd-crash/5689 "2019-05-18T04:03:07Z")
Please help!!! lol Today my M1HD internal display locked up on me. I had all external displays unplugged. It froze to the point that the time on the top right even stopped counting. The desk itself was still resposive b… --- ## [M6 Dodgy Motorized Fader](https://forum.obsidiancontrol.com/t/m6-dodgy-motorized-fader/5668)
**Author:** [@lxtech1](https://forum.obsidiancontrol.com/u/lxtech1)\ **Replies:** 0\ **Last updated:** [May 9, 2019, 11:55pm UTC](https://forum.obsidiancontrol.com/t/m6-dodgy-motorized-fader/5668 "2019-05-09T23:55:56Z")
Hi There, We’ve just had our faders replaced but recently fader 10 stopped working, when ever i change banks whatever its set to 0% 5% 50% it just moves the current values to the next Bank fader 10. A console restart f… [Previous page](https://forum.obsidiancontrol.com/c/onyx/hardware/33.md?page=2) [Next page](https://forum.obsidiancontrol.com/c/onyx/hardware/33.md?page=4)