# 4.4.1190 ISSUES WITH ZONE

**URL:** <https://forum.obsidiancontrol.com/t/4-4-1190-issues-with-zone/6149>\
**Category:** Software\
**Created:** [March 29, 2020, 8:40am UTC](https://forum.obsidiancontrol.com/t/4-4-1190-issues-with-zone/6149 "2020-03-29T08:40:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Giancarlo](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/giancarlo/32/3838_2.png) [@Giancarlo](https://forum.obsidiancontrol.com/u/Giancarlo)\
**Post date:** [March 29, 2020, 8:40am UTC](https://forum.obsidiancontrol.com/t/4-4-1190-issues-with-zone/6149/1 "2020-03-29T08:40:45Z")

</div>

HI TA ALL PATCH 10 PROTEUS MAXIMUS put them in a row of 10 CREATE A ZONE then dimmer full move them towards you ,after select the zone raise intensity you will see the fixtures lighting pavement with an intesity coloured by cyan!

 ![Cattura](https://forum.obsidiancontrol.com/uploads/default/original/2X/6/6e24d5f1fd338619d2fd4ae1d83f578ca8e8af99.png)

---

<div class="post-metadata">

**Author:** ![Matthias](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/matthias/32/70_2.png) [@Matthias](https://forum.obsidiancontrol.com/u/Matthias)\
**Post date:** [March 29, 2020, 5:04pm UTC](https://forum.obsidiancontrol.com/t/4-4-1190-issues-with-zone/6149/3 "2020-03-29T17:04:45Z")

</div>

This is due to the Capture Fixture model not going to full black when CMY is set all to 100%.  
Even doing this inside Capture alone will create that result.