# ArtNet with PC and M-Touch

**URL:** <https://forum.obsidiancontrol.com/t/artnet-with-pc-and-m-touch/5204>\
**Category:** Software\
**Tags:** m-pc, touch\
**Created:** [October 22, 2018, 5:37pm UTC](https://forum.obsidiancontrol.com/t/artnet-with-pc-and-m-touch/5204 "2018-10-22T17:37:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rickk](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/r/67e7ee/32.png) [@Rickk](https://forum.obsidiancontrol.com/u/Rickk)\
**Post date:** [October 22, 2018, 5:37pm UTC](https://forum.obsidiancontrol.com/t/artnet-with-pc-and-m-touch/5204/1 "2018-10-22T17:37:07Z")

</div>

Hi, I use a PC with the M-Touch console. I want to know if I can use the ArtNet protocol through the PC network port. That is by connecting the network cable to the PC and to the other side a DMX-node, thus using 4 universes and a network cable.

Thank you, Riccardo.

---

<div class="post-metadata">

**Author:** ![Watson](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/watson/32/250_2.png) [@Watson](https://forum.obsidiancontrol.com/u/Watson)\
**Post date:** [October 29, 2018, 3:58pm UTC](https://forum.obsidiancontrol.com/t/artnet-with-pc-and-m-touch/5204/2 "2018-10-29T15:58:25Z")

</div>

Riccardo,

Yes, you can use the ArtNet (or sACN) protocol out of the PC, in addition to the M-Touch physical output. Up to 4 universes for free. You’ll just have to configure the PC and ArtNet to DMX (or sACN to DMX) Node to be on the same network.

Hope this helps,

Watson

---

<div class="post-metadata">

**Author:** ![Rickk](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/r/67e7ee/32.png) [@Rickk](https://forum.obsidiancontrol.com/u/Rickk)\
**Post date:** [October 29, 2018, 5:58pm UTC](https://forum.obsidiancontrol.com/t/artnet-with-pc-and-m-touch/5204/3 "2018-10-29T17:58:33Z")

</div>

Ok, thank you!!

Riccardo