# Change group P/T values without removing individual ones

**URL:** <https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700>\
**Category:** Software\
**Created:** [May 2, 2021, 6:05pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700 "2021-05-02T18:05:37Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![l-p\_lx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/b782af/32.png) [@l-p\_lx](https://forum.obsidiancontrol.com/u/l-p_lx)\
**Post date:** [May 2, 2021, 6:05pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/1 "2021-05-02T18:05:37Z")

</div>

Wondering if there’s a way of changing the overall pan/tilt of a group without removing the relative positions of each fixture? So for example if you fan fixtures on pan and then adjust the main pan from the encoders, the pan snaps back to the centre. Is there a way of stopping that?

---

<div class="post-metadata">

**Author:** ![AnnoyedSandwich](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/a/ad7895/32.png) [@AnnoyedSandwich](https://forum.obsidiancontrol.com/u/AnnoyedSandwich)\
**Post date:** [May 2, 2021, 6:50pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/2 "2021-05-02T18:50:18Z")

</div>

you can either use the onscreen enocders on the right side or hardware encoders if you have them

---

<div class="post-metadata">

**Author:** ![Matthias](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/matthias/32/70_2.png) [@Matthias](https://forum.obsidiancontrol.com/u/Matthias)\
**Post date:** [May 2, 2021, 7:02pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/3 "2021-05-02T19:02:03Z")

</div>

All encoder adjustments by default are relative. If you use the TOUCH or MOUSE way of controlling parameters, there are ways to do this relative or direct.  
Please explain your setup/hardware/software version and how you control the fixtures.

---

<div class="post-metadata">

**Author:** ![l-p\_lx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/b782af/32.png) [@l-p\_lx](https://forum.obsidiancontrol.com/u/l-p_lx)\
**Post date:** [May 2, 2021, 7:24pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/4 "2021-05-02T19:24:58Z")

</div>

Not sure on the version I think it’s the last (not current) beta, but it’s been this way since I started using Onyx a couple of years ago. Say I select fixtures and give them individual pan/tilt values, and then I want to adjust the overall pan of the group without the pan of each fixture returning to centre as soon as I move the encoder. Is there a way to avoid this?

---

<div class="post-metadata">

**Author:** ![Ofer\_Brum](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/o/c67d28/32.png) [@Ofer\_Brum](https://forum.obsidiancontrol.com/u/Ofer_Brum)\
**Post date:** [May 3, 2021, 5:48am UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/5 "2021-05-03T05:48:18Z")

</div>

Seems like a bug…

Which Onyx build are you using?  
Is this with certain profile, or any profile?  
Can you post a short video, that demos this issue?

Regards,  
Ofer Brum  
Onyx Library Support

---

<div class="post-metadata">

**Author:** ![l-p\_lx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/b782af/32.png) [@l-p\_lx](https://forum.obsidiancontrol.com/u/l-p_lx)\
**Post date:** [May 3, 2021, 8:44am UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/6 "2021-05-03T08:44:51Z")

</div>

> **[VID\_20210503\_093929.mp4 (video)](https://drive.google.com/file/d/1U6A9jKszwQvJIuTA_5v2ueqn09Rc-6df/view?usp=drivesdk)**
>
> Google Drive file.

It doesn’t cancel individual values when I use the encoders on my M-Touch, but does when I use the ones on screen

---

<div class="post-metadata">

**Author:** ![Ofer\_Brum](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/o/c67d28/32.png) [@Ofer\_Brum](https://forum.obsidiancontrol.com/u/Ofer_Brum)\
**Post date:** [May 3, 2021, 9:22am UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/7 "2021-05-03T09:22:23Z")

</div>

So…

It acts like Matthias said above…

I see the same behavior with 1057… I guess this is how the software work…

Belt moves values in **Relative** manner, while Mouse/Touch in **Absolute** manner

Regards,  
Ofer

---

<div class="post-metadata">

**Author:** ![l-p\_lx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/b782af/32.png) [@l-p\_lx](https://forum.obsidiancontrol.com/u/l-p_lx)\
**Post date:** [May 3, 2021, 10:57am UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/8 "2021-05-03T10:57:41Z")

</div>

So is there a way to use relative movements with a mouse/touch input, or is that not possible?

---

<div class="post-metadata">

**Author:** ![deflost](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/d/49beb7/32.png) [@deflost](https://forum.obsidiancontrol.com/u/deflost)\
**Post date:** [May 3, 2021, 4:42pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/9 "2021-05-03T16:42:00Z")

</div>

… ? … .  
thx.

r.h.

---

<div class="post-metadata">

**Author:** ![Matthias](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/matthias/32/70_2.png) [@Matthias](https://forum.obsidiancontrol.com/u/Matthias)\
**Post date:** [May 3, 2021, 5:08pm UTC](https://forum.obsidiancontrol.com/t/change-group-p-t-values-without-removing-individual-ones/6700/10 "2021-05-03T17:08:00Z")

</div>

This is how it works for almost as long as the platform exists. A direct touch or click into the belt control sets all fixtures to that value (e.g. the color, prism, gobo)  
Physical Encoder movement on a console is always relative.

For relative adjustments without console hardware use the mouse scroll anywhere in the belt controls by hovering over the parameter, or click and drag the values/parameter name on the bottom, NOT in the large area above.

 ![image](https://forum.obsidiancontrol.com/uploads/default/original/2X/e/e12b2105acc3e290d6379fdf6d5448665ce95ed6.png)
