# Legacy support maxxyz

**URL:** <https://forum.obsidiancontrol.com/t/legacy-support-maxxyz/5614>\
**Category:** Installers and Operating Systems\
**Created:** [April 4, 2019, 11:41pm UTC](https://forum.obsidiancontrol.com/t/legacy-support-maxxyz/5614 "2019-04-04T23:41:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shivers305](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/s/9dc877/32.png) [@Shivers305](https://forum.obsidiancontrol.com/u/Shivers305)\
**Post date:** [April 4, 2019, 11:41pm UTC](https://forum.obsidiancontrol.com/t/legacy-support-maxxyz/5614/1 "2019-04-04T23:41:13Z")

</div>

I just received a maxxyz compact with v 2.92 and I wanted to update it to the last firmware 3.60… while doing this process it’s installing windows 7, and that’s where the error comes in, i get the windows could not update the computers boot configuration. I’ve tried the online methods of disk part/clean and mbr/gpt… the issue still persist. I can’t find any uefi or secure boot options to disable.

I’ve noticed it has a 64 ssd but only had 1gb ram, so i updated the ram to 2 1g sticks, still the same issue

Any ideas or suggestions I can try? Should I update the motherboard bios?

---

<div class="post-metadata">

**Author:** ![Shivers305](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/s/9dc877/32.png) [@Shivers305](https://forum.obsidiancontrol.com/u/Shivers305)\
**Post date:** [April 5, 2019, 12:49am UTC](https://forum.obsidiancontrol.com/t/legacy-support-maxxyz/5614/2 "2019-04-05T00:49:28Z")

</div>

![image](https://forum.obsidiancontrol.com/uploads/default/original/2X/3/31dbdaa0f2730794b0c11aa05de9343fcce92116.jpeg)