# Mixing Artnet-Universes

**URL:** <https://forum.obsidiancontrol.com/t/mixing-artnet-universes/7163>\
**Category:** ONYX\
**Created:** [September 27, 2022, 5:57pm UTC](https://forum.obsidiancontrol.com/t/mixing-artnet-universes/7163 "2022-09-27T17:57:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lights](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/ecd19e/32.png) [@Lights](https://forum.obsidiancontrol.com/u/Lights)\
**Post date:** [September 27, 2022, 5:57pm UTC](https://forum.obsidiancontrol.com/t/mixing-artnet-universes/7163/1 "2022-09-27T17:57:32Z")

</div>

Hey all!

Years ago I had a setup (not Onyx) using two different machines serving the same Artnet-Universe. One PC was controlling RGB, the other one controlling Dim, Strobe and Movement. The Fixture on this, second PC had a gap where the RGB channels usually were located, the other one was filling this slots.

First question, is it possible with Onyx?

Second Question, can I manipulate the fixture in the Editor to erase the RGB-Channel’s and get such a gap? What would be the right setting for those Channel’s to be transparent?

Any help is appreciated.

Mikel