# NX Touch automatically bank switch **URL:** \ **Category:** Software\ **Tags:** touch\ **Created:** [June 23, 2025, 4:27pm UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448 "2025-06-23T16:27:10Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Lexx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/df705f/32.png) [@Lexx](https://forum.obsidiancontrol.com/u/Lexx)\ **Post date:** [June 23, 2025, 4:27pm UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/1 "2025-06-23T16:27:10Z")
Hardware: NX Touch hello how can i make my nx touch automatically switch the banks in the software while i also switch them on the board ---
**Author:** ![Edward](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/edward/32/5155_2.png) [@Edward](https://forum.obsidiancontrol.com/u/Edward)\ **Post date:** [June 25, 2025, 11:30am UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/2 "2025-06-25T11:30:52Z")
Hi @Lexx Welcome to the forum. By default, the playback fader ribbon along the bottom of ONYX will be “Wing ID” 00. Therefore, if you would like this playback fader ribbon to stay synchronised with your NX Touch, you can set the Wing ID so they match. The NX Touch will likely have defaulted to Wing ID 01. Therefore, you could change the playback fader ribbon to Wing ID 01 too. To do this, click the “Bank” button bottom-left of ONYX. From the popup, set the Wing ID to 01… ![image](https://forum.obsidiancontrol.com/uploads/default/original/2X/8/80246c1802c389d2e293928b75271a113efbd559.png) I hope this helps. Edward ---
**Author:** ![Lexx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/df705f/32.png) [@Lexx](https://forum.obsidiancontrol.com/u/Lexx)\ **Post date:** [June 25, 2025, 10:09pm UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/3 "2025-06-25T22:09:47Z")
hi yeah that worked thank you ---
**Author:** ![Edward](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/edward/32/5155_2.png) [@Edward](https://forum.obsidiancontrol.com/u/Edward)\ **Post date:** [June 26, 2025, 10:50am UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/4 "2025-06-26T10:50:46Z")
No problem at all. Let us know if there’s anything else we can help with. ---
**Author:** ![Lexx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/df705f/32.png) [@Lexx](https://forum.obsidiancontrol.com/u/Lexx)\ **Post date:** [June 26, 2025, 1:30pm UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/5 "2025-06-26T13:30:48Z")
do you know how i can make all the lamps go strobe white even though they were a different color before and no strobe? ---
**Author:** ![Edward](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/edward/32/5155_2.png) [@Edward](https://forum.obsidiancontrol.com/u/Edward)\ **Post date:** [June 26, 2025, 1:39pm UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/6 "2025-06-26T13:39:36Z")
To do this, record a cue which contains the fixture at full intensity, with colour set to white, and strobing. The fixture will probably be white by default. However, you will need to make sure you manually mix the colour to white by touching the RGBW encoders. If you don’t touch the encoders, the parameters won’t activate, and that means they won’t then be recorded. If you open the Programmer window, you will be able to see which parameters you have adjusted and activated. Once the strobe, RGB(W), and intensity parameters have been activated, record your white strobe to an Override cue list. You can then play back this cue list, and your fixtures will strobe in white, even if another cue list is running with the fixtures on in a different colour. Hope this helps, Edward ---
**Author:** ![Lexx](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/l/df705f/32.png) [@Lexx](https://forum.obsidiancontrol.com/u/Lexx)\ **Post date:** [June 26, 2025, 2:22pm UTC](https://forum.obsidiancontrol.com/t/nx-touch-automatically-bank-switch/8448/7 "2025-06-26T14:22:32Z")
worked thanks