# Problems with enttec on version 4.2.1057

**URL:** <https://forum.obsidiancontrol.com/t/problems-with-enttec-on-version-4-2-1057/6369>\
**Category:** Hardware\
**Created:** [August 24, 2020, 5:37pm UTC](https://forum.obsidiancontrol.com/t/problems-with-enttec-on-version-4-2-1057/6369 "2020-08-24T17:37:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![AnnoyedSandwich](https://forum.obsidiancontrol.com/letter_avatar_proxy/v4/letter/a/ad7895/32.png) [@AnnoyedSandwich](https://forum.obsidiancontrol.com/u/AnnoyedSandwich)\
**Post date:** [August 24, 2020, 5:37pm UTC](https://forum.obsidiancontrol.com/t/problems-with-enttec-on-version-4-2-1057/6369/1 "2020-08-24T17:37:52Z")

</div>

Hi, so I’m using an older version of onyx to get the enttec support since my venue is to broke to afford the nx hardware.

I’m using an enttec opendmx ethernet dongle.  
For some reason onyx doesn’t want to output via this dongle. Sometimes onyx shows that it’s connected to the enttec and sometimes it doesn’t

Any ideas how to solve that issue

---

<div class="post-metadata">

**Author:** ![rsmentele](https://forum.obsidiancontrol.com/user_avatar/forum.obsidiancontrol.com/rsmentele/32/3459_2.png) [@rsmentele](https://forum.obsidiancontrol.com/u/rsmentele)\
**Post date:** [August 25, 2020, 3:35pm UTC](https://forum.obsidiancontrol.com/t/problems-with-enttec-on-version-4-2-1057/6369/2 "2020-08-25T15:35:02Z")

</div>

Hello,

Have you tried to download the latest firmware/drivers of the ENTTEC product?